Bonnet rubber bumper kit which fits the sides and front of the bonnet of the vehicle.
To install the side rubbers to the bonnet size the hole in the rubber first using a piece of stiff fencing wire or a small screwdriver cut the end of level with no sharp edges, then lubricate the domed head and carefully push the head through the hole in the bonnet, with the round bonnet rubbers for the adjuster bolts, lubricate then push over the bolt head with a twisting motion, then adjust the bonnet so it’s level with the guards.
This product suits Holden FB, EK
- Standard, Special
- Sedan, Wagon, Utility (Ute), Panel Van
- Fitted with 6 cylinder Grey motor