Handbrake (emergency brake) cable which is for the front of the vehicle.
Please note: This front handbrake cable fits up through the floor beneath the handbrake assembly. First measure the distance between the front handbrake pulley bracket and the center of the cable locating pin in the pulley. If necessary correct the distance by turning the front cable adjuster to the following dimensions 1.25” Approx. 32mm, then take up the slack of the intermediate and rear cables by turning the adjusting nut at the equalizer. Tighten the lock nut. Apply the handbrake pull lever and then return it to the released position, check that the rear wheels turn freely
Note: Approximately 0.1“free play should exist at each rear handbrake cable.
This product suit Holden HZ, WB
- Holden, Kingswood,SL, Premier, Statesman, DeVille, Caprice, Sandman, Monaro GTS 4 Door, 1 Toner
- Sedan, Wagon, Utility (Ute), Panel Van, Chassis Cab
- Fitted with 6 cylinder Red/ Blue motor, 3300 (202), 8 cylinder V8 Red/ Blue motor, 4.2 Liter (253), 5.0 Litre (308), engine.